Gavita

These 1-5/8 in bracket assembly kits are use to hang your Gavita fixture on a unistrut or rail systems. Includes 1 long and 1 short bracket set with 2 M6 bolts and 1 M6 nut per kit. Use to fasten it on the top plate and lamp bracket. Sold in quantity 12...

The 3 way cable splitter is needed to connect the Gavita Master Controller to your E-Series ballasts when running ballasts inline. Used with Gavita E-series interconnect cables.

The Gavita Pro 1650e LED is a 1650 µmol s-1 fixture with an impressive efficiency of 2.6 µmol s-1 per watt. The Pro 1650e delivers broad coverage with its 8 passively cooled LED bars. The 8-bar configuration allows you to use it in low rooms, over single...

The Gavita Pro 1650e LED is a 1650 µmol s-1 fixture with an impressive efficiency of 2.6 µmol s-1 per watt. The Pro 1650e delivers broad coverage with its 8 passively cooled LED bars. The 8-bar configuration allows you to use it in low rooms, over single...

The Gavita Pro 1650e LED is a 1650 µmol s-1 fixture with an impressive efficiency of 2.6 µmol s-1 per watt. The Pro 1650e delivers broad coverage with its 8 passively cooled LED bars. The 8-bar configuration allows you to use it in low rooms, over single...

The B200 Booster enhances the Master Controller EL1 and EL2 by expanding the number of fixtures controlled. The Gavita Master controllers are equipped with one port allowing growers to control up to 50 fixtures. Adding the B200 Booster, growers can...

Optional power cord for Gavita fixtures 277 volts and higher. This pigtail power cord can be hardwired and can be disconnected by a fixture side IP68 Wieland RST plug. Choose from 3 ft 3 in/1 m, 6 ft 6 in/2 m or 10 ft/3 m in length.

Gavita Controller Cables attach the Gavita Master controller to the Gavita E-Series ballast. These come in 5, 16 and 25 ft configurations to best fit your specific application.

The Gavita Pro 1700e LED fixture operates at 645 watts with an output of 1700 µmol s-1 PAR and an impressive efficacy of 2.6 µmol s-1 per watt. The Pro 1700e delivers broad, intense light coverage with its 8 passively cooled LED bars allowing you to use...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The E-Series LED Adapter is designed to be used with the Gavita 1700e LED fixtures. This product runs inline with the power cord to the fixture. Using this device in conjunction with the LED fixture will allow you to control them with an EL series...

The ECM connect cable is used to connect an ECM1 (External Contactor Modules) to the Gavita Master Controller.

External Contactor Module (15A) with blue indication LED follows lights-on for main channel. Use ECMs to switch CO2, fertigation, heating etc. during lights-on or lights-off cycle. ECMs can be positioned close to the actual accessories. Cable outputs...

Gavita enhanced lamps are the grower’s choice for stability, light output and light maintenance. Change your lamps only once a year with these high quality lamps, that have a light maintenance of over 96% per year. Always make sure that you run lamps at...

Our HR96 reflector is made of a very high grade Miro aluminum with 95% efficiency, which provides optimal reflectance of light to your crop. The shape of this reflector may look as a deep reflector, but it actually gives you a medium wide beam angle of...

HortiStar 600 SE has a replaceable Miro aluminum reflector with 95% efficiency. This fixture is suitable for HPS and MH lamps 600 watt to 750 watts. The lamp cord terminal is shielded by a metal housing. Installation is very easy with two eye bolts...

Gray interconnect cables used for Gavita fixtures that are equipped with double RJ connectors also know as Gavita Repeater Bus system. You can easily recognize them as they are gray instead of black, and have ferrite coils on each end to minimize...

This replacement reflector for the Gavita Pro line and Classic line requires no tools to install. The medium spread of this reflector with 110° beam angle is great for tents and small rooms. This is Gavita's most suitable reflector for single-light set...

Lighting control at your fingertips! The Master controller EL1 and EL2 Gen 2 are our entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded...

Lighting control at your fingertips! The Master controller EL1 and EL2 Gen 2 are our entry-level systems for centrally controlling large rooms with e-series fixtures. The second generation of Master controllers features improved and expanded...

These are packaged bulk for commercial applications and sold in increments of 70 (1/2 pallet). The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100...

Gavita horticultural High Pressure Sodium (HPS) lamp with high output and extreme long light maintenance. Change once a year for best results. Light maintenance 5000 hrs: >96%. Color temperature is 2100° K and the lamp base is K12 x 30s. Suitable for...

Professional 600 watt high frequency electronic ballast. Microprocessor controlled. Driver efficiency >95%. Sealed housing with Gore-Tex® ventilation plug. The higher output and added efficiency of the industry standard HR96 reflector make this the...

The E-series Pro 1000e DE is the newest flagship model, now available in 277-347 volt. The E-series Pro 1000e DE Gavita comes with a Gavita Pro Plus 2,100 µmol, 1000 watt DE lamp. These fixture are equipped with what we call the Gavita repeater bus. The...

The new Gavita 6/750e watt 400 V EL DE lamp has an efficiency of 2 µmol s-1 per watt in a wide control range of 600-825 watt. Now that is flexibility! At 825 watt it rivals air cooled 1000 watt HPS fixtures with an output of 1650 µmol s-1, while...

The new Gavita 6/750e watt 400 V EL DE lamp has an efficiency of 2 µmol s-1 per watt in a wide control range of 600-825 watt. Now that is flexibility! At 825 watt it rivals air cooled 1000 watt HPS fixtures with an output of 1650 µmol s-1, while...

The Gavita Pro 600e SE is part of the new Gavita e-series fixtures that are suitable for remote control with the Gavita Master Controllers. Equipped with a 1190 µmol s-1 600W 400 V electronic high frequency lamp, it produces more light than any other...

Only 9.7 inch high makes the ‘Slim Line’ the shortest 240 volt Gavita fixture ever. Highest light output and maintenance over time. It has the HR96 reflector for the maximum efficiency and uniformity. Highly efficient passive cooling of ballast for a...

Gavita Pro Plus 1000W EL Double-Ended 400 V lamp is one of the best 1000 watt HPS lamps on the market. Specifically designed for high frequency electronic ballasts, it has a connection at each side of the lamp, removing the need for a frame wire inside...

Replacement reflector for Gavita Pro line and HortiStar. Easy to install, no tools required. Wide spread for optimal uniformity (150° beam angle). Suitable for double-ended 750-1000W HPS. This reflector is most suitable for overlapping plans. Designed...

The Gavita repeater bus connection kit is the Gavita Cabling kit for custom installation. Repeater Bus accessories are different from the Master Controller accessories. Beside a standard RJ 12 crimp tool the kit contains everything you need to make 4...